blog details
Tron pinball blowing fuse F8

Earlier this week the Tron pinball that was recently put back into Flynn’s blew the fuse at F8. I replaced the 3A slow blow fuse and it blew right away again. I tested the transistors on the driver board and they seem alright to me. I then checked all the coils under the playfield and found that the coil for the drop target reset was shorted, reading .4 Ohms. I unplugged the coil and put a mini breaker in place of the fuse to test with the coil unplugged. I was able to play a full game without the breaker tripping. I will order a new coil and hopefully Tron will be back in business later this week. Attached is a picture of the bad coil.



Leave a Reply