blog details
Pinbot ready for use

This is again ready for use. The playfield was stripped down to a bare playfield and cleaned and waxed. The ramps, plastics and vortex were cleaned and polished. New rubbers were put on. The shooter rod got new barrel spring, sleeve, shooter spring and washers. The flippers seem fine at this point. We do have a rebuild kit ready when needed. It does have a display out in the 4th position and a weak one in the 3rd position. These will be replaced before putting back into service. I am including before and after pictures of the playfield partially torn down. It appears I forgot to take a picture of the playfield all together. I will try to include that when I replace the displays. 

Leave a Reply